格兰CLC pro保护性耕作复式联合整地机

可配最高350马力拖拉机的残茬联合整地机,工作幅宽3.0-5.0米。

 

格兰 CLC pro保护性耕作复式联合整地机

设计独特的中空深松齿臂,经国际顶级热处理工艺加工,具有结构先进、强度大、韧性好、可靠性高等一系列亮点;齿臂在外力作用下,可横向移动15-20厘米,不变形。

标准双头铲尖,可调换使用,寿命增加一倍;可选装翼型铲,用于浅翻作业。

深松齿支架采用螺栓固定,可以调节齿数及齿间距。

前排灭茬耙片,后排双圆盘耙片。

主要性能:

  • 采用重载型机架
  • 最大耕深可达40厘米
  • 工作幅宽为3.0-4.9米
  • 自动复位保护装置适用于石块多的地块
  • 安全螺栓保护装置适用于石块少或无石块地块
  • 采用世界领先水平的热处理加工工艺加工的机件,坚固耐用
  • 标准双头铲尖,与格兰犁铲尖通用,可调换使用,寿命增加一倍;可选装翼型铲,用于浅翻作业
  • 机架后部可选配不同设备:单排耙,V型双排耙,X型双排耙,碎土笼以及单排耙加碎土笼

 

 技术参数:

机型 CLC PRO 3.50 CLC PRO 500F
工作幅宽(米) 3.50 4.90
机架类型 一体式 折叠式
运输宽度(米) 3.50  2.85
深松齿数量 9-12  17
主机架  100 × 100 毫米
深松齿排数   2/3  3
三点悬挂  Cat. II 或 Cat. III
齿臂离地间隙 0.80米 
犁尖  双头可调换式犁尖 (翼型铲尖为选装)
耕深  5-40厘米
配套动力 (马力)  180-250  250-310
亮点

CLC pro - Strong Frame

  • The frame design and heavy-duty central beam offers in-field durability even under extreme working conditions.
  • The machine offers high underbeam clearance with 870mm to cope with incorporation of high volumes of crop residue.
  • The frames can absorb e.g. 240 hp with 3.00m and up to 350hp for the folding implements with 5.0m.
  • The material used can bear significant loads while staying reliable and light.
  • The weight carried by the tractor is thus reduced and helps saving fuel.

Tines and Shares

  • The unique and robust design of the tines incorporates a specially heat treated hollow “C” profile.
  • The heat treatment is of the same standards as the beams on the Kverneland ploughs.
  • For lighter conditions, Kverneland offer the "C" tine with shearbolt overload protection releasing from 2 tons.
  • The Kverneland "C" tine equipped with the "Auto-reset" leaf spring safety system is the perfect choice for hard and stony conditions.
  • The tine leg can withstand sideway movements of up to 14cm for the CLC pro, CLC pro Classic, CLC pro Cut and to 20cm for the CLC Evo. This means lower stress to the tine holder and frame structure.
  • The "C"-tine system is maintenance-free.

Tines can be combined with a variety of share systems allowing working depths between 5cm and 30cm

  • The "C"-tine: with the standard reversible plough point made of high quality steel for maximum service life. This allows to work at great depths even in stony soil - eliminating plough pans and in this way encouraging natural drainage. 
  • For stubble cultivation the "C" tine can be equipped with 30cm wing shares.
  • New Quantum share 345mm - always in combination with Knock-on® or Tiger carbide point 80mm. It has been designed for use especially in hard soil. The 80mm point combined with the 345mm wing share ensures perfect penetration and complete flat cutting for a homogeneous weed regrowth.
  • Two types of carbide points – 80mm and 150mm Tiger point. The special design ensures progressive and high penetration and requires low pulling force. The special shape of the carbide plate resist against aggressive stony conditions. All points available with Knock-on® deflectors too.
  • Click here for further details on the Knock-on® system. 

Leaf Spring/Vibromat

  • For lighter conditions Kverneland offer the CLC tine with shearbolt overload protection.
  • This version of the CLC tine offers the same high quality as that of the „Auto-reset“ tine, and is releasing from 2 tons.
  • The Kverneland CLC tine equipped with the “Auto-reset“ leaf spring safety system is the perfect choice for hard and stony conditions.
  • The well renowned Kverneland leaf spring protects the tines against overload. The tine starts to release with loads over 640 kg. The release force decreases with the release height to protect the frame against high stress.
  • All pivot points of the CLC tines are manufactured with wear resistant bushes and bolts of the renowned Kverneland quality.
  • Therefore the CLC tine system is maintenance-free.

Rear Accessories CLC pro

The CLC pro is the model which can be equipped with the full range of following implements.

Levelling discs:

  • Rubber spring loaded, to follow the ground and protect against stones
  • Border discs as standard adjustable to the soil flow

Combi disc harrow:

  • Combination of a single disc gang with all roller type
  • Intensive mixing at shallow depth

Double disc gang ø 510 mm:

  • Does a good mixing and incorporation
  • Leaves a rough surface with aggregates ready for wintering, interesting at the end of autumn season for preparing spring fields and crops

Cage roller ø 550mm - 90 kg/m

  • 10 bars for a good loading  capacity and operation in wet conditions
  • Effective crumbling action

Double cage roller ø 400mm (tube/flat) - 160 kg/m

  • Good crumbling
  • Precised depth control

Actipack ø 560mm - 220 kg/m

  • The Kverneland Actipack roller displays its superb working qualities especially on medium to heavy soils, also in wet, stony and sticky conditions thanks to the independent skids and knives
  • The cutting discs break the larger clods whilst the adjustable knives cut the remaining clods resulting in optimal clod breadown and fine seedbed preparation

Actiring ø 540mm - 160 kg/m

  • The Actiring roller is a lighter variant of the Actipack, using the same frame structure and knife system
  • The discs have been replaced by a “V” profile ring, this is saving 60kg/m, which is of critical importance for reducing lifting requirements for mounted equipment
  • Actiring is not recommended in stony conditions

Actiflex roller ø580mm - 160 kg/m

  • The Actiflex roller has been made to create an intensive mixing under all conditions, even stony ones
  • The rings are made with spring steel to have a high resistance against stress at high speed
  • Actiflex rings are separated by skids to prevent any accumulation inside the roller
  • This roller is the ideal tool to create a nice seedbed and enhance the weeds regrowth after harvesting