格兰80110 C摊晒机

格兰80110C摊晒机使用非常简单。所有功能通过液压操作,都可以在驾驶室内控制。可以通过液压调整到边界摊晒模式,有效防止作物损失。尽管作业幅宽较大,但是运转简洁。标配运输架,使机器马力匹配较小。

主要性能:

  • 免维护Pro-Line齿轮箱
  • 边界摊晒通过液压简单调整
  • 独特的运输解决方案,通过运输架主梁快速而可靠的运输
  • 箱体是主梁由两个U型截面组成,结构极其坚固
  • 中央单元设计坚固,允许高速运输
  • 大尺寸摆动减震器性能优异
  • 摊晒弹齿直径10毫米,齿圈直径80毫米,坚固耐用
  • XXL转盘直径大于500毫米
  • 摊晒角度可无工具快速调整

 技术参数:

  工作幅宽 转子/弹齿 重量(公斤)
80110 C 11.00 8/7 1600
亮点

ProLine Gearbox

  • The ProLine gearbox is a strong and reliable construction, and is not fitted to the mainframe.
  • Shock-protected: The enclosed system is not affected by chassis or tine arm vibrations.
  • Constant lubrication: Enclosed and oil-immersed, the gearbox components enjoy extended longevity over systems that require manual lubrication.
  • Reduced maintenance: There is no need for daily lubrication.
  • Environmental protection: No lubrication means no leakage - hence higher-quality forage.
  • No corrosion: No ingress of dust and water, not even during pressure washing. 

Oscillation Dampers

  • Kverneland oscillation dampers ensure excellent ground contour following and tedder flotation.
  • The construction of the oscillation dampers results in a smooth and even distribution of the grass, thanks to the constant tine distance from the ground.
  • Widely spaced mounting points - no risk of ‘hunting’.
  • Excellent running characteristics.
  • Low-positioned linkage on the headstock, for more effective damping action during transport.
  • No risk of the tedder running under the tractor on downhill work, excellent tedding at all times through constant tine spacing to the ground.

Super-C Tines

  • The Super-C tine can be locked in three positions to customize the pickup angle to different conditions. For heavy silages the angle can be set more aggressive and for fragile crop a gentler angle can be chosen.
  • Made from flat steel, the tine arms form a very compact unit with the rotor plate and utilize the force of the rotor plate for higher durability of the time arm. This makes a Kverneland tine arm by far more resistant to any type of load.
  • Super-C tine with symmetric spring tines ensures efficient pick-up and turning of the crop. Tines with same lengths has the added advantage that load is spread evenly on both tines, providing longer life time.
  • Made from 10mm shot-peened spring steel and a coil diameter of 80mm, Super-C tines add up to the most durable and flexible tine in the market.

 

 

Large Dimensions

  • The box type frame of the Kverneland 8000 series is an extremely solid construction. It is composed of two U-sections fitted into each other and securely welded together. The frame is totally enclosed at the top for maximum strength.
  • All tedders have greasable pivoting points with an extra large diameter, making it a very strong and reliable construction.
  • Made from flat steel, the tine arms form a very compact unit with the rotor plate. This makes the tedders by far more resistant to any type of load.

Spreading Angle

  • High-quality forage allows the optimum spreading angle to be achieved according to crop conditions, helping you to produce high quality forage.
  • Setting the rotors to the right spreading angle will considerably improve the spreading action, and speed up the drying process.
  • The mower swaths are neatly lifted by the tines and evenly spread over the full width.
  • Tines glide in a more uniform frequency over the stubble, so the risk of dirt being lifted by the tines is minimized.

Efficient Border Tedding

To increase productivity, all mounted tedders are Standard equipped with a mechanical border tedding device.

All carried tedders (8090 C, 85112C, 85140 C) have standard hydraulic solution for border tedding.

A marker cleverly shows the position of the axle.

  • It only takes a few seconds to place the tedder in the right position.
  • For 85140 C border tedding is set by moving the outer arm at the correct angle.