格兰7850圆捆包膜机

• Kverneland pre-stretchers provide even film stretch throughout the roll, are easy to operate and require low maintenance.
• The unique pre-stretch roller profile keeps the stretched film at its optimum width and results in fewer problems with film tear.
• The rollers are made of aluminium which avoids the build-up of tack from the film, which can result in overstretch of film and film tear.
• Specially profiled rollers help to disperse air and water as the film is being stretched.
• Change of film roll is quick and easy with Kverneland pre-stretchers. The empty core is released by pushing down a single lever with one hand.
• Low lifting height of the film rolls is achieved thanks to the low profile design of all Kverneland bale wrappers.

• Wrapping table with 4 endless belts and two driven rollers, carries and rotates the bale evenly during wrapping with no risk of film damage.
• The twin pre-stretchers ensure high speed wrapping. They are positioned close to the bale, to limit the amount of air trapped under the film during wrapping.
• The loading system doesn’t require the wrapper to lift the bale. Instead it gently rolls the bale onto the table, which then tilts to a level position to start wrapping.
• The ‘Inline’ layout means that it loads and unloads bales in the same direction as the baler leaves them, so avoiding having to drive over un-baled swaths.

Computer Control (C)

• The computer controlled Model C turns the wrapper into a fully automatic machine offering either a fully automatic operation or a choice of manual override or function by function operation.
• Choose for example that you want the bale to wrap automatically off.
• One operator does the entire process of loading, wrapping and stacking when loaded, but remain on the wrapping table until you confirm that you want to offload.
• Compact joystick allows temporary manual control of the bale loading and turntable rotation/tip